Category Product Lists

<p>The Tank, Infantry, Mk III, Valentine was an infantry tank produced in the United Kingdom during the Second World War. More than 8,000 of the type were produced in eleven marks, plus various specialised variants, accounting for approximately a quarter of wartime British tank production.The many variants included riveted and welded construction, petrol and diesel powerplants and a progressive increase in armament. It was supplied in large numbers to the USSR and built under licence in Canada. Developed by Vickers, it proved to be both strong and reliable. Valentine III with the GMC 6004 diesel and US-made transmission.</p><br>

<p>In the summer of 1941, Germany's invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improve captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed the 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter. </p> <h3>Features</h3> <ul> <li>1/35 scale plastic assembly model kit based on the German Tank Destroyer Marder III.</li> <li>Overall length: 174mm</li> <li>Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction.</li> <li>All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated.</li> <li>Protective armor and sighting equipment moves with raising and lowering of main gun.</li> <li>Crew seats and large clamp for main gun can be modeled in the fighting or moving positions.</li> <li>Two crew figures are included in set. Five kinds of battlefield markings are included.</li> </ul> <p> </p>

<p><strong>FEATURES</strong></p> <ul> <li>WORKABLE TORSION BARS</li> <li>ALL HATCHES CAN BE POSED OPEN</li> <li>CLEAR PARTS INCLUDED</li> <li>PHOTOETCHED PARTS INCLUDED</li> <li>DECAL SHEET FOR 6 VARIANTS</li> </ul>

<p>This is a plastic model kit, which comes unassembled and unpainted. So glue, model paints and other basic modelling tools are additionally required.</p> <p>The kit contains plastic sprues, resin, photoetch, waterslide decals and clear parts.</p> <h3>Specification</h3> <ul> <li>Scale 1:35</li> <li>Unbuilt / unpainted</li> </ul>

<p>The BRDM-1 is an amphibious armored reconnaissance vehicle designed by the former Soviet Union. It was originally called BRDM, and when BRDM-2 entered production for the Soviet Red Army in 1962, it was renamed BRDM-1. BRDM (also known as BTR-40P) first appeared in 1957 and was in production until 1966. Total production is around 10,000 vehicles, and reserves in some countries are still less than 600 vehicles. Some of them were modified into 3M6 anti-tank guided missile vehicles.<br></p> <h3>Features</h3> <ul> <li>The kit consists of over 300 parts</li> <li>The kit w/refined detail</li> <li>Multi-slide molded lower hull &amp; upper hull</li> <li>Rubber tires</li> <li>Photo-etched parts included</li> </ul> <h3>Specification</h3> <ul> <li>Model Dimension: Length: 149.2mm Width: 61.5mm</li> <li>Total number of parts: 300+</li> <li>Metal parts: brass wire</li> <li>Etched parts: 2 pcs</li> <li>Total number of offset plates 7 sprues, upper hull, lower hull and tires</li> </ul>

<h3>PT-76 Workable Track links 02047</h3> <p>Unassembled plastic model kit. Paints and glue not included.</p> <h3>Features</h3> <ul> <li>180 individual track links</li> </ul> <ul></ul> <h3>Specification</h3> <ul> <li>Dimensions: Length: mm Width: mm Height: mm</li> <li>Total Parts: 540pcs</li> <li>Total Sprues: 18 sprues and 180 track links</li> </ul>

<p>L4500A mit 2cm Flak 38</p> <h3>Features</h3> <ul> <li> Full drive train assembly complete with engine transmission, differential housing and suspension units.</li> <li>The main tires are hollow rubber with very good tread pattern</li> <li>Photo-etched parts included</li> <li>Flak 38 included</li> </ul> <h3>Specification</h3> <ul> <li>Scale: 1:35</li> <li>Item Type: Plastic Model Armor Kit</li> <li>Model Brief: Length: 229.2mm Width: 67.1mm</li> <li>Total Parts: 420+</li> <li>Photo Etched Parts: 4 pcs</li> <li>Total Sprues: 10 sprues and tires</li> </ul>