Category Product Lists

<h3>About Russian Tank Infantry</h3> <p>While sustaining huge losses at the onset of Operation Barbarossa, the Russian army was able to halt the German advance just short of Moscow thanks largely to the strength of their tank troops. Following concentrated artillery fire, tanks advanced in three waves with infantry riding on the tanks of the second and third. Since the Russian ground forces did not possess armored troop carriers like half-tracks and universal carriers, so-called 'Motor Rifle Units" were attached to every tank brigade to provide infantry support. Once encountering an enemy's defensive position, tank riders would disembark, attack the position, and then remount to proceed with the offensive. These infantrymen spearheaded many attacks, and suffered heavy casualties from defending fire.</p>

<p>KAMAZ trucks were once among the most common all-wheel-drive vehicles in the Soviet Army. They featured a robust design and a reliable diesel engine located above the cab. Serial production of the KAMAZ-4310 model began in 1981 at the factory in Naberezhnye Chelny. The basic model used by the military was primarily intended for transporting personnel or cargo up to 6 tons in weight. From the mid-1980s, the vehicle became the main transport chassis in the Soviet Army and the primary medium-class vehicle for mounting various types of superstructures and equipment. Common variants included those with KUNG bodies – enclosed cabins for mounting special equipment and transporting personnel. One such body type was the K4320D. These vehicles continue to be in service with the armed forces of several countries, and a certain number of them are still successfully used by the Armed Forces of Ukraine.</p>

<h3>The T-80BVM is an upgraded version of the T-80BV main battle tank.</h3> <p>It was first publicly revealed in 2017, the upgraded T-80BVM has slightly improved armor protection. It is fitted with Relikt explosive reactive armor kit. The same armor is used by the latest Russian main battle tanks, such as T-90M and T-90MS.</p> <p>However the T-80BVM was the first operational tank to be fitted with this new explosive reactive armor. The Relikt provides protection against tandem warheads and reduces penetration of APFSDS rounds by over 50%. The tank is fitted with rubber side skirts, with built-in armor plates. Rear parts of the hull and turret are covered by cage armor. The T-80BVM is reportedly fitted with a passive countermeasures system, which improved protection against some types of anti-tank guided missiles.</p> <h3>Features</h3> <ul> <li> <p>Consists of over 970 parts</p> </li> <li> <p>The kit w/refined detail</p> </li> <li> <p>Multi-slide moulded turret and lower hull</p> </li> <li> <p>192 individual tracks links</p> </li> <li> <p>Etched Photo parts included</p> </li> </ul> <h3>Specifications</h3> <ul> <li> <p>Model Brief: Length: 280.2mm Width: 106.8mm</p> </li> <li> <p>Total Parts: 970+</p> </li> <li> <p>Metal Parts: copper cable</p> </li> <li> <p>Photo Etched Parts: 2 pcs</p> </li> <li> <p>Total Sprues: 30 sprues and lower hull</p> </li> </ul> <p> </p>

<p>With over 70,000 produced between 1937 and 1944, the 3ton 4x2 German cargo truck was a vital cog in the operations of WWII German forces. It featured a simple rear wheel-drive chassis with a 68hp engine, which enabled a maximum on-road speed of 85km/h and a range of 320km. Such performance, coupled with its superb load-carrying capacity and reliability, saw this invaluable truck supplied to units on all fronts and hauling vital supplies and fuel.</p><p>Precision plastic assembly model kit. Paint and glue not included. Requires assembly and painting. For intermediate to advanced skill modellers.</p>

<p>The M4 Sherman medium tank was the primary tank used by the United States during World War II. It has been produced in a significant number of units ant it formed the backbone of United Stated armoured forces during at those time. it has been produced in several variants and versions The production of the  M4A3E8 versions started at the end of 1944. The M4A3E8, adopting the nickname Easy Eight, took several technical improvements enhancing  the Sherman operational effectiveness. The 76mm M1 high velocity gun had been flanked by a new horizontal volute spring suspension (HVSS) system able to ensure a better driving condition and to guarantee a higher speed. The “Easy Eight” participated to the final stages of World War II and took active part in the Korean War. </p> <h3>Features</h3> <ul> <li>WWll Tank Collection</li> <li>100% New Mould</li> <li>79 Parts</li> <li>Highly Detailed Kit</li> <li>Decals For 4 Versions</li> <li>Figure Included </li> </ul> <!---->

<p>Model kit of the Churchill AVRE tank engineer This was used in the invasion of Normandy and the advance in Western Europe.</p> <h3>Features</h3> <ul> <li> <p>Diorama plate</p> </li> <li> <p>Detailed bridge construction</p> </li> <li> <p>soft plastic chain</p> </li> <li> <p>Includes plastic model kit (unassembled), illustrated, multilingual building instructions, decals</p> </li> </ul> <h3>Specifications</h3> <ul> <li> <p>Age:12+</p> </li> <li> <p>Number of parts:87</p> </li> <li> <p>Length:235 mm</p> </li> <li> <p>Width:57 mm</p> </li> <li> <p>Height:77 mm</p> </li> </ul> <h3>Contents</h3> <ul> <li> <p>Kit</p> </li> <li> <p>Paint</p> </li> <li> <p>Paint brush</p> </li> <li> <p>Revell glue</p> </li> </ul>