Category Product Lists

<p>The USS Enterprise (CV-6) was an American aircraft carrier, the keel of which was laid in 1934, launched in October 1936, and commissioned with the US Navy in May 1938. The ship was 252 m long, 33.4 m wide, and her full displacement at the time of launching was 25,500 tons. The maximum speed of the USS Enterprise was around 32-33 knots, and its main armament consisted of 90 on-board planes.</p> <p>The USS Enterprise was the second Yorktown-class aircraft carrier. The experience gained during the operation of Lexington-type vessels was used in the construction of this type of ship. First of all, it was decided to build relatively large aircraft carriers, with the greatest emphasis on the number of planes taken and the maximum speed, at the expense of armor. So they were going in the same direction as the Japanese designers, and in the opposite direction to the British Royal Navy. It is worth adding that the construction of the aircraft carrier popularly known as "Big E" was part of the program of rebuilding the American economy after the Great Depression of 1929, launched by President Franklin D. Roosevelt. During its long and well-deserved service, the USS Enterprise was modernized several times: in 1940 it received an air surveillance radar (type CXAM-1), and later in 1942 it received a new SC-2 radar. In the course of the fighting in the Pacific, the anti-aircraft weapons were also changed, which in October 1943 had 40 40 mm cannons and 50 20 mm cannons. At the outbreak of World War II in the Pacific, the USS Enterprise was near Pearl Harbor and, shortly after the Japanese attack, took part in a fruitless search for its attackers. In April 1942, the carrier covered the famous Doolittle Raid in Tokyo. Following this operation, he played one of the most important roles in the Battle of Midway in June 1942. Later in 1942, the USS Enterprise was intensively involved in naval operations in the Guadalcanal area, for example in the Battle of Santa Cruz Island. In November 1943 he covered the American landings on Tarawa and Makin. In early 1944 he took part in the fighting in the Marshall Islands area, and in June of that year he took part in the Battle of the Philippine Sea. In 1945, it supported the American operations on Iwo-Jima and Okinawa, being damaged in their course. It was taken off the line and scrapped in 1960. The USS Enterprise was one of the most distinguished and decorated ships of the US Navy during World War II.</p> <p>Detailed plastic model kit including detailed instructions, decals and in some cases other accessories (etchings, resin and others). Paints and glue are not part of the product and must be purchased separately.</p> <p>This is an injection-plastic ship model kit.</p>

<p>Launched in 2016, FEN DOU ZHE is the full ocean deep manned submersible with the capabilities of supporting longest seabed operation time, providing extraordinary operational performance and accommodating largest number of passengers per time. Its localization rate of key components exceeds 96.5%. Its research and development team has developed a cutting-edge operational capability by targeting extreme environment, carrying out super design and through ultimate manufacturing. With the maximum diving depth of 10909m, its 10,000-meter sea trials were completed successfully in 2020. It has been applied since 2021, which marks that 10,000-meter manned submergence formally enters into the era of conventional scientific research.</p> <h3>Features</h3> <ul> <li>Pre painted model kit/snap kit<br> </li> <li>The kit consists of  over 40 parts</li> </ul> <h3>Specifications</h3> <ul> <li>Model Brief: Length: 141.7mm   Width: 44.4mm <br> </li> <li>Total Parts: 40+<br> </li> <li>Total Sprues: 4 sprues and hull</li> </ul> <!---->

<p>The Conqueror is the second of the Royal Navy's Churchill-class nuclear submarines and the ninth ship to carry the Conqueror name. It's the only nuclear submarine to have engaged a combat ship and sunk it with a torpedo.</p> <p>Launched in 1969 and commissioned in 1971, the Conqueror, like other British nuclear submarines during the Cold War, was built to counter the threat of the Soviet Navy, either by monitoring Soviet nuclear submarine activity or by attacking submarines and surface ships.</p> <p>During the Falklands War of 1982, she was used to guard the outer edge of the task force around the Falkland Islands, and on May 2 of the same year, she sank the Argentine Navy cruiser Heneral Belgrano.</p> <p>After the conflict, the Conqueror returned to England and served in the North Atlantic until her decommissioning in 1990.</p> <h3>Features</h3> <ul> <li>The kit comes with etched parts and decals and measures approximately 248mm in length when completed.</li> <li>Completely new mold kit 1/350 HMS Conqueror is now available from Micro Mir in Ukraine.</li> </ul> <p> </p>

<h3>The CB-2 Guam, the U.S. Navy's second Alaska-class cruiser, is the subject of this new model kit from Trumpeter!</h3> <p>Her hull is slide-molded, and the superstructure such as the deck and bridge are delicately molded for excellent detail. A display stand with a nameplate and photo-etched parts are included.</p> <h3>Features</h3> <ul> <li> <p>Hull made from multi-directional slide moulds.</p> </li> <li> <p>Deck wood pattern finely rendered</p> </li> <li> <p>Contains display stand and engraved name plate</p> </li> <li> <p>Photo-Etched parts included</p> </li> </ul> <h3>Specifications</h3> <ul> <li> <p>Model Brief: Length: 352.1mm Beam : 40.2mm</p> </li> <li> <p>Total Parts: 370+</p> </li> <li> <p>Metal Parts: anchor chain</p> </li> <li> <p>Photo Etched Parts: 1 piece</p> </li> <li> <p>Total Sprues: 9 sprues , hull ,deck</p> </li> </ul> <p> </p>

<p>Katata was a Japanese river gunboat under which the keel was laid in April 1922, launched in July 1922, and commissioned in the Imperial Japanese Navy in October 1923. The length of the ship at the time of launching was 56.1 m, width 8.23 m, and displacement - about 340 tons. The maximum speed of the Katata gunboat was 16 knots. The main armament at the time of the launch was 2 80mm guns and 6 7.7mm machine guns. In 1940 and 1943, 7.7 mm machine guns were replaced by 13.2 mm machine guns, and finally by 25 mm anti-aircraft guns.</p> <p>Katata was the second-highest Set's gunboat gunner. Vessels of this type (4 ships in total) were created as specialized units intended for inland navigation. From the very beginning, it was also assumed that they would have a relatively low draft and displacement, while maintaining quite strong - for this class of ships - on-board armament. Of course, this made it de facto impossible to sail in open waters, and the seaworthiness of Set's gunboats was low. Nevertheless, they were well suited for the role for which they were intended. The Katata gunboat was built at the Harima shipyard in the city of Aioi, and later transported in sections to Shanghai and assembled there. The vessel sailed on the Yangtze for almost the entire 1920s. It also took an active part in the Japanese-Chinese war (1937-1945). In December 1944, it was severely damaged by an American air raid, and in April 1945 the Katata gunboat was sunk.</p> <p>This is an injection-plastic ship model kit.</p> <h3>Features</h3> <ul> <li>1/700 Scale Plastic Model Kit Waterline Series</li> <li>Set includes parts to build two waterline ships, the Katata and the Hozu.</li> <li>Ready to assemble plastic model kit.</li> <li>Paints and cement (not included) are needed to complete the model.</li> <li>Side cutters, modeling knife and tweezers are also recommended.</li> <li>Product sold without glue and paint.</li> </ul> <h3>Specifications</h3> <ul> <li>Item Size: 29.0cm x 11.0cm x 4.0cm</li> </ul>

<p>Renown completed in 1916 was first renovated around 1923-26 centered on the addition of armor. After that, the second refurbishment has been carried out since 1936, further reinforcement of defense power, the replacement of institutions and the use of secondary guns, and the superstructure also remodeled greatly Particularly the bridge is a tower similar to King George V class It has been redesigned into a thing. By this, the second ship Repulse transformed into a different modern appearance, acting until the end of the war centered on the fleet escort.<br>After the modernization and refurbishment to the tower type bridge and the like, the kit reproduced the time of 1945 when the catapult was lost, renovation to the boat deck, and further augmentation of air resistance were carried out.</p>

<p>Discover the Juan Sebastian Elcano lifeboat, wooden model of this representative sailboat brigantine Spanish schooner. It receives its name by the Spanish explorer Juan Sebastian Elcano, captain of the expedition - after the death of Fernando de Magallanes -, that completed the first return to the world in 1522.</p> <p>Launched in 1927 in Cadiz, Juan Sebastian Elcano serves as a school ship in the Navy for the Marine Guards. In the second semester of the fourth year of his career at the Naval Military School they conducted an instructional cruise, a six-month voyage to America and some twenty thousand miles of travel.</p> <p>In preparation for the great race of 3,600 miles between Lisbon and Hamilton in 1964, some of her sails were amended and aftersome hard training, the ship reached a speed of 15 knots.Build with this kit a beautiful replica of one of its lifeboats.</p> <h3>Contents</h3> <ul> <li>Build your scale model 1/35 Juan Sebastian Elcano lifeboat, the training ship of the Spanish Navy. Designed as an beginner modeling kit, the model has parts of cut board by laser, noble wood, brass and cast iron. For the assembly you will be able to follow our complete guide step-by-step on DVD. The kit does not include printed instructions.</li> <li>It is a perfect scale replica for those who want to initiate on naval modeling.</li> </ul>

<p>In 1939 the German Supreme Command officially passed the code-named "Z" large-scale shipbuilding program, "Z plan" officially launched. Plans will enable Germany through the implementation of nearly 10 years of large-scale shipbuilding program, and ultimately have the challenge to the most powerful of the strength of the sea.</p><p>Z program is the core of two large battleships, one of which is Bismarck class battleship, another level: H-class battleship.</p><p>The planned H-Class battleship design began in 1937, when a total of six were expected to be built. The first ship H39 started in 1939, the year on July 15 officially laying keel. However, on October 10 that year was suspended for the construction of U-submarines. Due to shortage of raw materials and the beginning of World War II so there is no H-class battleships.</p><h3>Features</h3><ul> <li>The kit contains over 1140 parts</li> <li>The hull made from two-directional slide molds</li> <li>Deck wood pattern finely rendered</li> <li>Contains display stand</li> <li>Photo etched parts included</li> <li>2 Ar196 included</li> </ul><h3>Specifications</h3><ul> <li>Model Brief: Length: 793.7mm Beam: 104.9mm </li> <li>Total Parts: 1140+</li> <li>Metal Parts: anchor chain</li> <li>Photo Etched Parts: 4 pcs</li> <li>Total Sprues: 20 sprues , hull , deck and stand</li> </ul>