Category Product Lists

<p>Blue-Eyes White Dragon, one of the most popular monsters in "Yu-Gi-Oh Duel Monsters" has been turned into a Figure-rise Standard Amplified kit!</p><h3>Features</h3><ul> <li>The charm of the character has been "amplified" with a new interpretation of the design arrangement unique to the plastic model. A metallic blue color has been used for the molding to make the monster feel more epic, and its huge wings, each measuring about 265mm in length, are equipped with joint axes for posability.</li> <li>The wing membranes are made of soft material. Gradation printing is applied, allowing you to enjoy various color tone changes depending on the angle, posing, etc.</li> <li>The arm and leg joints are equipped with movable axes, so the unique outline of the dragon has been recreated while achieving a wide range of movement.</li> <li>The neck and tail are made from parts that are divided according to the joints and have built-in lead wires, allowing for movement that gives a sense of life. The form is maintained even when the figure is flexed or twisted.</li> <li>Movable jaw and tongue on the head allow for expressions when posing.</li> <li>Two display joint parts are included to expand the range of poses.</li> </ul><h3>Accessories</h3><ul> <li>Display base x 1 formula</li> <li>Joint parts for display x 2 types</li> <li>Lead wire x 1</li> </ul>

<h3>The Brady Fox Type G, a reinforced version of the Brady Fox that appeared in the second part of the "Kyoukai Senki" anime and cornered the main characters, is now part of Bandai's 1/72 scale "HG" model-kit series!</h3><p>Its dark coloring is perfectly reproduced for an anime-accurate look, and its laser cannon is included; hand parts allow it to be held with both hands. Its large shield is also included, and it can be displayed in either its manned or unmanned mode by replacing parts on the head visor. Pairs well with the V-33 Stork Carrier.</p><h3>Includes</h3><ul> <li>Laser cannon</li> <li>Large shield</li> <li>Hand parts: open hands (left and right), weapon-holding hands (left and right), gun-holding hand (right)</li> <li>Manned mode reproduction parts</li> <li>Foil stickers</li> </ul>

<h3>The crimson New Ren from "Kyoukai Senki" gets a new HG model kit from Bandai!</h3><p>A wealth of weapons such as rifles, axes, missile launchers and shields are included; the magazine is removable and can be stored behind the shield. Three types of interchangeable hands are included (weapon holding, flat hands, grip hands). Combine multiples of this kit to recreate the united form as seen in the show!</p><h3>Includes</h3><ul> <li>Rifle</li> <li>Axe</li> <li>Missile launcher (x2)</li> <li>Shield</li> <li>Interchangeable hands: flat hand (left and right), grip hand (left and right), weapon-holding hand (left and right)</li> <li>Foil stickers</li> <li>Marking stickers</li> </ul>

<h3>The Brady Hound (Brad exclusive) from "Kyoukai Senki" gets a new model kit from Bandai!</h3><p>It can be combined with the Stoke Carry or mass-production machine; it comes with two swords, and the rifle magazine and grenade can be removed. Two types of hands are included; head parts for its parked state are included, which can be reproduced by parts replacement. The foot claws can be stored, and the characteristic shape of Blood's machine, including the shoulder, head and sword, is carefully reproduced.</p><h3>Includes</h3><ul> <li>Interchangeable hands (weapon-holding, left and right; flat hands, left and right)</li> <li>Rifle with grenade launcher</li> <li>Sword (x2)</li> <li>Head replacement parts</li> <li>Foil seals</li> </ul>

<p>Retooled and improved! The kit is approx. 1:55 scale and includes 5 figures. The kit will come in a "paper wrapped" Aurora style box like the original.</p> <h3>Features</h3> <ul> <li>Highly detailed plastic pieces molded in light gray</li> <li>Detailed interior</li> <li>Pilot, copilot and passenger figures included</li> <li>Waterslide decals</li> <li>Illustrated instructions</li> </ul>

<img> <br><br> <p>Project Mercury was NASA's name for our first manned space program, and on May 5, 1961, Commander Alan B. Shepard Jr. piloted Freedom 7 to became the first American in space. The other 5 Commanders included Scott Carpenter, Wally Schirra, Gordon Cooper, Alan Shepard, Gus Grissom and John Glenn. </p> <p>MRC, along with Atomic City Model Engineering recreated a perfect miniature of this aircraft and it's escape tower. Measuring over 2 feet tall, this miniature piece of history is incredibly detailed with attention to detail that will astound you. The Mercury capsule's corrugated exterior is fully covered with rivets, engraved markings and every detail of the original. The interior detail contains the instrumentation along with a vinyl Astronaut figure to add to the realism. The three rocket, red escape tower is there too, and on the original would have rocketed the capsule to safety if there was a problem with the Redstone launch vehicle. Can be displayed in various flight configurations - deployable destabilizer open/closed. </p> <p>This is an impressive model, and the space modeler can build any one of the six legendary Mercury capsules. </p> <h3>Features </h3> <ui> <li>Corrugated exterior covered with rivets and fully engraved markings </li> <li>Marvelously detailed cockpit interior</li> <li>Includes escape tower, antenna fairing, recovery compartment, crew cabin, heat shield, vinyl astronaut figure, and retropack.</li> <li>All parts fit together beautifully</li> <li>Escape Tower is removable</li> <li>Can be displayed in numerous flight configurations - Deployable Destabilizer Open/Closed</li> <li>Comes with decals for you to build any one of the 6 legendary Mercury capsules. Including: Aurora 7, Sigma 7, Faith 7, Freedom 7, Liberty Bell 7, and Friendship 7</li></ui> <br><br> <img> <img>

<p>Bandai's newest line of plastic model kits comes from the series Danball Senki and like most Bandai kits are snap-fit and molded in color. Like the other kits in the series, this kit of LBX Odin can be made without the use of tools as Bandai has designed the parts to come off the runners only using your hands! The Odin comes with foil marking stickers, full color, easy-to-follow instructions and clear parts. Check out the other plastic kits in the Danball Senki line!</p> <p>Item Size/Weight: 30 x 19 x 5.7 cm / 300g</p>

<h3>Now you can build Frieza's hover pod from "Dragon Ball Z" for your very own!</h3> <p>Parts come molded in color, and parts to build a non-articulated figure of Frieza in his first form are included. The scale is similar in size to the Dragon Ball Z Figure-rise Standard series, making it perfect to display with the other kits from the series! Completed kit measures about 12.5cm tall.</p> <p>Item Size/Weight: 30 x 19 x 9.5 cm / 340g</p>

<h3>Here's a set of energy weapons for your "30MM" (30Minutes Missions) and other 1/144-scale kits!</h3> <p>The combined sword is equipped with a deployment gimmick; if disassembled, it can be used as a small sword or as parts for customization. You can choose from a variety of blade types for the medium-sized sword; the blades are available in clear blue and gray. Both round and square energy tanks are also included which can be attached to mechs and weapons.</p> <h3>Includes</h3> <ul> <li>Combined sword</li> <li>Blade parts (clear blue)</li> <li>Blade parts (gray)</li> <li>Medium-sized sword handle parts (handle + tsuba) (x2 sets)</li> <li>Energy tank parts (clear blue) (round and square)</li> <li>Energy tank parts (gray) (round and square)</li> </ul>