Category Product Lists

<h3>Features</h3> <ul> <li>Highly Detailed Model</li> <li>Full Interior</li> <li>Clear Parts Included</li> <li>All Hatches Can Be Posed Open Or Closed</li> <li>Decal Sheet For 6 Variants</li> </ul> <ul></ul>

<p>The Academy 13428 Leopard 2A4 (Polish Painting) 1:72 scale plastic model kit recreates the Leopard 2A4 tank in the colors used by the Polish Army. The Leopard 2A4 is one of the most modern main battle tanks, which has been in service with the Polish Armed Forces since its purchase from Germany in the early 21st century.</p> <p>The Leopard 2A4 model in Polish paint is a great option for military enthusiasts, especially those interested in the modern Polish armed forces. The set offers a realistic and detailed image of one of the most important tanks used by Poland.</p> <h3>Includes</h3> <ul> <li>120mm Rh120/L44 main gun and 7.62mm MG3A1 machine gun</li> <li>Semi-connected tracks</li> </ul> <h3>Decals for 6 versions</h3> <ul> <li>Bundeswehr, 361th Pz. Battalion, "Certain Challenge" exercise, West Germany, 1988</li> <li>Turkish Army, 2th Cavalry Armored Brigade, Turkish-Syrian border, 2016</li> <li>Turkish Army, 2th Cavalry Armored Brigade, Turkish-Syrian border, 2016</li> <li>Swiss Army, Pz. 87, 13th Pz. battalion, Steel Army Parade, Thun, 2006</li> <li>Ejercito de Tierra, Brigada "Extremadura" XI, 16" reg. infanteria mecanizada, 1995</li> <li>Polish Army, 10th Armored Cavalry Brigade, 1st tank Bn., 2th company, 2012</li> </ul>

<!----> <p>The Oshkosh M-ATV is an Mine Resistant Ambush Protected(MRAP) vehicle developed by the Oshkosh Corporation of Oshkosh,Wisconsin for the MRAP All Terrain Vehicle (M-ATV) program. It is designed to provide the same levels of protection as the larger and heavier previous MRAPs but with improved mobility and it is intended to replace M1114 HMMWVs.</p> <p>The M-ATV utilizes the Medium Tactical Vehicle Replacement (MTVR) chassis and TAK-4 suspension with the Plasan designed armored hull developed for the Northrop Grumman/Oshkosh JLTV Technology Development (TD) phase proposal. The V-shaped Plasan armored hull offers protection for the occupants from IED attacks while a central tire inflation system (CTIS) and run-flat inserts allow the M-ATV to travel at least 30 miles at 30 mph even if two tires lose pressure. The vehicle can also take a 7.62 mm round to its engine oil/coolant/hydraulic system and continue to drive for at least one kilometer. The Stat-X engine fire suppression system provides for further survivability.</p> <h3>Features</h3> <ul> <li>The kit consists of over 100 + parts</li> <li>Rubber tires</li> </ul> <h3>Specification</h3> <ul> <li>Scale: 1:72</li> <li>Item Type: Plastic Model Armor Kit</li> <li>Model Dimension: Length: 86.4mm Width: 35mm</li> <li>Total Parts: 100+</li> <li>Total Sprues: 3 sprues , frame , hull and tires</li> <li>Photo Etched Parts: 1 piece</li> </ul>

<p>Super heavy tank designed as an alternative to the Maus, it used a modified Maus turret with the 150mm KwK 44 with plans to upgrade it to the 170mm KwK 44 later. Development of the E-100 started in June 1943 &amp; continued steadily until 1944 when Hitler stopped all development of super heavy tanks. But even though, three engineers carried on the work at a low priority &amp; by the end of the war they managed to nearly finish the first prototype which only needed a turret. The only prototype was sent to England after the allies captured it &amp; scrapped post-war.</p> <h3>Features</h3> <ul> <li> <p>The kit consists of over 470 parts</p> </li> <li> <p>The kit w/refined detail</p> </li> <li> <p>Multi-slide moulded lower hull and upper hull</p> </li> <li> <p>Rubber tracks</p> </li> <li> <p>Photo etched parts included</p> </li> </ul> <h3>Specifications</h3> <ul> <li> <p>Model Brief: Length: 253.6mm Width: 128mm</p> </li> <li> <p>Total Parts: 470+</p> </li> <li> <p>Total Sprues: 16 sprues , upper hull , lower hull and rubber tracks</p> </li> </ul>

<p>In 1928, the American automobile corporation Ford began its expansion into the European market, and one of their most promising partners was Germany, which at that time had already largely overcome the economic decline caused by the consequences of the First World War.The economy of the Weimar Republic was growing at a steady pace, and there was a demand in Germany, the birthplace of the automobile, for a significant number of private cars.</p> <p>As early as 1930, mass production of Ford passenger cars began at the Cologne plant. In general, they were very similar to their American counterparts, differing only in various exterior details. One of the most popular was the Ford Eifel 20C, more than 60,000 of which were produced from 1935 to 1939. In 1937, a new model came off the assembly line, the G78A, and a year later the G81A. This had a more powerful 8-cylinder engine, improved bodywork and chassis.</p> <p>After Adolf Hitler came to power, cooperation between the new government and Western investors in general not only did not stop, but even increased, including in the automobile industry. The gradual restoration of the army, which Germany was denied according to the terms of the Treaty of Versailles, required a significant increase in equipment, including passenger cars, and after the beginning of the Second World War, almost all private cars were requisitioned for the needs of the military. At the same time, factories received new, even larger orders to increase the number of vehicles in the army.</p> <p>The Ford G81A, like many other types of passenger car, was extensively used by army units. Some parts of the Wehrmacht used these cars, as well as the Luftwaffe, police units and others, mainly as a staff car. A small number of Ford G81As were converted so as to be fitted with field radios and used by communications and radio reconnaissance units. The rear part of the car body was rebuilt in order to accommodate the substantial volume of the specialized radio equipment. Cable reels and additional handrails were also installed. Despite the relatively small number of such radio vehicles, their operation continued almost until the end of the Second World War, both on the Eastern and Western fronts.</p> <h3>Includes</h3> <ul> <li> <p>Highly detailed plastic parts</p> </li> <li> <p>Waterslide decals</p> </li> <li> <p>Transparent parts</p> </li> <li> <p>Coloring scheme for model</p> </li> <li> <p>Detailed illustrated instruction in English</p> </li> </ul> <p> </p>

<p>High quality, precision plastic model kit. Paint and glue not included. Requires assembly and painting. For intermediate to advanced skill modellers.</p>