ESU 51992 Adapter Board 24-Pin E24 Socket to PluX16
6.00
$
<p><strong>Adapter board 24 pin E24 socket to PluX16</strong></p>
<p>This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means, for example, a LokSound 5 Nano or LokPilot 5 Nano can be easily installed in older locomotives that only provide a PluX16 interface (e.g. some Fleischmann H0 locomotives or Piko N or TT locomotives)</p>
ESU 53953 Adapter Board 24-Pin E24 Socket to Open Wires 88mm
6.00
$
<p><strong>Adapter board, 24-pin E24 socket to open wires, 88mm, heat shrink</strong></p>
<p>The E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface using the LokSound 5 Nano. With dimensions of only 19.6 mm x 8.5 mm, the board is exactly the same size as the decoder itself and therefore only increases the thickness as a “sandwich”. Already soldered connection wires with a length of approx. 88 mm for power pickup, motor and speaker as well as U+, the two light outputs and AUX1, AUX2, AUX5 ensure easy handling and wiring. Soldering pads are available for AUX3, AUX7 and AUX8.</p>
Hornby R7150 Standard 6 Pin Decoder
28.00
$
<p>The Standard 6 pin Decoder measures at 18mm in length and comes complete with wires shown.</p>
<h3>Specification</h3>
<ul>
<li>Item Scale: 1:76 Scale</li>
<li>Gauge: OO</li>
<li>Finish: Painted</li>
<li>Colour: Green</li>
</ul>
NCE D13NHP Stay Alive Decoder
43.00
$
<p>Caution: Not for use with more than 15 Volts track voltage. Suitable for HO Scale ONLY. Direct plug in to locos equipped with NMRA 8 pin plug</p><h3>Features</h3><ul>
<li> NCE No-Halt_Insurance technology, keeps locos moving over dirty track</li>
<li> Supplied as two pre-wired modules for easier, more flexible installation</li>
<li> Silent Running,torque compensated motor drive</li>
<li> Motor rating 1.3 Amp continuous, 2 Amp peak (stall)</li>
<li> All four function outputs have lighting effects generators</li>
<li> Select from 15 different lighting effects</li>
<li> Full support for LED lighting</li>
</ul>
